In cascading routers, specifically LAN to LANconnections, setting the second router to Bridge mode would not allow access for guests. NOTE: A single router that is set in Bridge mode will disable the Guest access of the router. For more information on how to do this, click here. QUICK TIP: If you have a wireless router, you can proceed in configuring its wireless settings. Powercycle the secondary router and once the Power light is solid, check whether you're able to access the Internet on your devices. Make sure the main router is still connected to the modem via its Internet port. Unplug the cable from your computer and connect it to one of the Ethernet ports on the main router. 2įor the DHCP Server Setting, set the DHCP Server to Disabled. NOTE: If the IP address is the same as the main router, change the fourth octet (the number in the fourth box) to a different value. Under the Basic Setup sub-tab, look for IP Address or Local IP Address. If you’re using a Mac® computer, click here. For detailed instructions on how to do this, click here.Ĭonnect your computer to one of the Ethernet ports of the secondary router.Īccess the web-based setup page of the secondary router. For instructions on how to change the router’s LAN IP address, click here.Ĭascading the Linksys router to another router (LAN-LAN)Ĭheck and take note of the IP address of the main router. In this case, you need to change the IP address of the secondary router. This is necessary to avoid conflict and connectivity issues in the local network if they have similar IP addresses. NOTE: Before you connect a Linksys router to another router, make sure that both routers have different IP addresses. However, computers that are connected to the main router will not be able to communicate with the secondary router, and vice versa since there are two (2) different networks. This connection makes it easier to identify which router the computers and other devices in the network are connected to since they will have different LAN IP segments. This type of cascading requires the main router and the secondary router to have different IP segments. LAN to WAN – Connecting one of the Ethernet ports (LAN ports) of the main router to the Internet port (WAN port) of the secondary router. NOTE: When cascading routers using this method, you will not be able to access the web-based setup page of the secondary router as it will have the same IP range as the primary router. For a video tutorial on this setup, click here. This configuration is recommended if you want to share files and resources within the network. To do this, you need to disable the secondary router's DHCP server. This type of cascading requires the main and the secondary routers to be on the same LAN IP segment to allow the computers and other devices to connect to both routers. LAN to LAN – Connecting one of the Ethernet ports (LAN ports) of the Linksys router (main router) to one of the Ethernet ports (LAN ports) of another router (secondary router). There are two (2) ways to cascade a Linksys router to another router: For more information and instructions in setting your router as a wireless bridge, click here. This method is officially supported only by selected router models. NOTE: The wireless equivalent of cascading is called bridging. If your main router is non-Linksys, you need to contact the manufacturer for support however, if it is Linksys, click here to learn how to set it up. Contact your Internet Service Provider (ISP) if you can’t connect to the Internet directly from your modem. IMPORTANT: The main router should have an active Internet connection before cascading the secondary router otherwise you need to set it up first. If you want to cascade a non-Linksys router to the main router, you need to call its manufacturer for support. The second router should be Linksys and will be called secondary router. In this scenario, the main router can either be Linksys or a third party and will be referred to as the main router. Connect more devices (wired and wireless).Improve the performance of the network without removing your older router.Cascading is a term used when connecting a router to another router.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |